Safe Work Method Statements
A SWMS (Safe Work Method Statement) is a document that sets out the high-risk construction work activities to be carried out at a workplace, the hazards arising from these activities and the measures to be put in place to control the risks.
One SWMS can be used for work that involves multiple high-risk construction work activities, for example, a work activity that requires using powered mobile plant, working at heights of more than 2 metres and working adjacent to a road used by traffic other than pedestrians.
A SWMS is classed as an administrative control and is used to support higher order controls to Eliminate or minimise risks to health and safety, for example, engineering controls.
What information must be included in a SWMS?
A SWMS must:
- identify the work that is high-risk construction work
- specify hazards relating to the high-risk construction work and the risks to health and safety
- describe the measures to be implemented to control the risks
- describe how the control measures are to be implemented, monitored and reviewed
A SWMS should be short and focus on describing the specific hazards identified for the high-risk construction work to be undertaken and the control measures to be put in place so the work is carried out safely (see Appendix A). A lengthy, overly detailed SWMS can be difficult to understand, apply at the workplace, monitor or review.
A SWMS must be easily understood by workers, including those from non-English speaking backgrounds. For example, pictures or diagrams may be a more effective way of communicating information.
While there are other legislative requirements to ensure health and safety—for example, to control exposure to noise and manual task hazards—these hazards and risk controls do not need to be included in a SWMS.
If the SWMS is based on a workplace-specific risk assessment, evidence of the risk assessment may be required by the regulator or for auditing purposes but does not need to be detailed in the SWMS.
How do SWMS help the worker?
Employees should ensure that they familiarise themselves with the SWMS relevant to their workplace. The SWMS will provide information about the types of high-risk construction work being done, the health and safety hazards and risks arising from that work, how the risks will be controlled and how the risk control measures will be put in place.
Employers also need to ensure that work is done according to the procedures set out in the SWMS by properly supervising and training their employees.
It is also important that employees, health and safety reps, as well as contractors and their employees, are consulted when the SWMS is being prepared as much as is reasonably practicable to avoid incidents where employers are not aware of the hazards and so fail to reasonable guard against them.
HEALTH & SAFETY
Safe Work Method Satements is paramount to carrying out any high-risk tasks on Construction sites across Australia. They help to identify the Helth & Safety Risks associated with the high-risk task and their objective is to reduce risk and keep everyone safe on site.
CO-OPERATION OF WORKERS
Safe Work Method Statements require the co-operation of the Principal Contractor, Sub Contractors and workers on site. This is to ensure that everyone is involved and has input into the SWMS. The Principal Contractor is responsible for ensuring the high-risk construction is being performed safely in accordance with the SWMS.
Another benefit of Safe Work Method Statements is reducing the number of injuries on site therefor directly increasing productivity and decreasing downtime due to injuries.
Get a Free Quote Today
Whether you’re undertaking a residential or commercial construction project, PERFECT HIRE™ Labour with Tools has everything you need to ensure the job is completed on time and to budget. Give us a call on 1300 737 332 today for professional advice.