Yanmar 3.5t Excavator
Our 2 ton Yanmar Excavator features True Zero Tail Swing, which means that this excavator is designed especially to work in tight confined spaces, perfect for those projects where access if limited.
Common Zero Tail models kept the overhand during turning to within just 10 percent of the crawler width. The ViO achieves the ultimate goal of no overhang at all. Since the counterweight and front corners never extend beyond the vehicle width, there is no concern even on projects right up against a wall – it’s safe, easy and smooth. The wide spacing of the distinctive Yanmar offset crawler tracks achieves a good grip on the ground and the high tensile strength steel plates keep the implement light. The outstanding balance that results is further enhanced by the newly developed large counterweight. The resulting stability is as great as that of a conventional style unit. It also features the first tailor made hydraulic quick-coupler in the industry. The arm was designed from start to accommodate our new hydraulic quick-coupler, so that job performance will be significantly enhanced. The use of a conventional manual coupler is relatively time-consuming, and results in reduced productivity. With the Yanmar hydraulic quick-coupler, however, attachment changes can be greatly expedited.
VICTAS provides and expanded track gauge for more stability without increasing undercarriage width, and the short-pitch rubber crawler permits more comfortable traveling. The hydraulic control levers are carefully positioned to permit easy entry and exit to and from the workstation. Joystick pilot controls with arms rests are convenient to use and reduce operator fatigue.
The ViO also features a clean and environmental engine inside, Yanmar C&S (Clean & Silent) engines are approved under the emissions and the noise regulations of the EU (Europe) and the EPA (United States). The audible traveling alarm signals people nearby when the machine is being moved.
Our excavators also come with Perfect Hire’s Operators who have years of experience working with all different types of plant machinery. Whether you need our small ultra-mini Yanmar excavator for those projects with limited access or you need our bigger 5 ton Yanmar capable of handling those bigger projects.
|Operating Weight:||Rubber track Lbs(kg) 4910(2230)|
|Engine||Water cooled 3-cylinder diesel Output Hp(kW)/RPM 19.2(14.3) / 2400|
|Performance:||Max, digging force, bucket/arm lbs(kN) 3987?3057(17.7/13.6) Traveling Speed MPH(km/h) 2.7/1.4(4.4/2.2) Swing Speed RPM 9.5 Boom Swing Angle (L/R) degrees 45/75degrees|
|Ground Contact Pressure:||Rubber TrackPSI(kPa) 4.0(27.7)|
|Hydraulic System:||Pump capacity GPM 5.7+5.7+5.6+3.2 (L/min) (21.6 + 21.6 +21.12+12.24) Main relief pressure PSI(MPa) 2988 / 2422 (20.6 / 16.7)|
|Blade Dimensions:||Width X Height Ft-in(mm) 4’6”(1380x285)|
|Fuel Tank Capacity:||Gals(L) 7.5(28.5)|
| Actual product supplied may vary slightly from displayed product.
Prices may vary based on actual quantities provided/used.
Date of supply may vary based on availablity.
All orders will be confirmed prior to booking.